Mark
5.
Undo washer and nut,
and pull cable up
to allow for working
clearance.
(Deck mount option
shown).
6.
Strip
cable
to mark.
7.
Thread barrels onto stripped
end of cable, above the Cable
Mounting Hole on Endcap.
Please Note:
Draper recommends using two
crimps per cable.
8.
Crimp the barrels
approximately
1/8
"
(3mm)
above mark.
PLEASE NOTE:
Draper
®
recommends
32-VC:VG Crimper,
available from
www.nicopress.com
9.
Trim excess cable as
desired.
page 5 of 12
N E 220V
