Before Installing the Cable Guides, remove the Roller Assembly from the Case.
(See Removing Roller Assembly section on Page 2)
.
Pencil
Mark
Section 6 -
Installing Cable Guides
2.
Place washer and
nut approximately
halfway up threads
of bolted end of
cable to allow
space for travel.
4.
Pull cable taut and
mark cable under
Cable Mounting Hole
with pencil.
(Wall mount
option shown.)
1.
Install Mounting Bracket
using appropriate
fasteners.
(Wall mount
option shown.)
3
A.
Pull cable up,
through the
Mounting
Bracket
3
B.
Pull cable up,
through Cable
Mounting Hole on Endcap.
(Wall mount option shown.)
page 4 of 8
N C
