Draper GC4, Брошюра

Страница: 4 / 20

Motorized FlexShade Dimensions
Maximum bundle diameter dictates the size of headbox
with endcaps, fascia with endcaps, and standard brackets,
which is governed by the size of shade and choice of fabric.
Consult D
RAPER
to determine which size is required for your
installation. Hardware details shown on page 16.
Motorized FlexShade
The simplicity of shades with the
versatility of motorized operation.
• MOTORIZED FLEXSHADES are available in any size from 2 through
4 wide. Larger sizes are available with FLEXSHADE 2 or COLOSSAL
FLEXSHADE.
• Furnished with mounting brackets. Optional fascia cover, headbox,
and extruded aluminum pockets with bottom closure are available.
See pages 6 & 7 for hardware details.
• Up to 5 MOTORIZED FLEXSHADES can be coupled together to reduce
the number of motors required.
• Available with a variety of motor options including: quiet, built-in
radio frequency control, battery or low voltage operation. See page 5
for details.
• Wall switch included with each shade, or choose one of our versatile
control options. Details on pages 5 and 6.
• Depending on size of shade, battens may be used to assure a smooth
flat surface.
Dimensions, drawings and specifications available at:
www.draperinc.com/go/MotorizedShade.htm.
Motorized FlexShades with SheerWeave 2000 fabric, 5% openness, and
IntelliFlex controls, SGC4. Carol Grotnes Belk Library, Appalachian State
University, Boone, NC. Installation: Bonitz Contracting Company, Inc.,
Concord, NC. Architects: Pease Associates, Inc., Charlotte, NC; Shepley
Bulfinch Richardson and Abbott, Boston, MA; McCraken & Lopez P.A.,
Charlotte, NC. Photography: © Martin Fox Photography, Fairview, NC.
Motors are installed on the right-hand side as standard. They may be
specified on the left.
Standard bracket
Optional endcap
and fascia
Headbox/Endcaps Standard
or Fascia/Endcaps Brackets
Small Large Small Large
A¹
⅞ ⅝
A²
½ ¼
B¹
¹⁵⁄₁₆ ¼
B²
⅜ 
C¹
¹¹⁄₁₆ ⁵⁄₁₆
C²
⅝ ⁵⁄₁₆
D¹
⅜ ⅝
D²
 ¼
F¹
⅜ ⅝
E²
¹⁄₁₆ 
On the Cover:
Heifer International Headquarters, Little Rock,
AR. Newly constructed in February 2006, the
94,000 sq. ft. building was recognized by the
American Institute of Architects as one of
the “Top Ten Green Projects” in the United
States in 2007. The Heifer project utilizes both
motorized and manual D
RAPER
F
LEX
S
HADES
for solar control. D
RAPER
installation by Blind
Ambition, and photography © Timothy
Hursley, both of Little Rock, AR.
Cloth width = Overall width - 1 5 /
8
"
Overall
height
13 /
16
"
1 /
16
" 1 /
16
"
13 /
16
"
D
2
C
2
E
2
B
2
A
2
5 /
16
"
A
1
B
1
C
1
D
1
www.draperinc.com 800-989-0126
4