Section 2 -
Attaching Guide Cables
1.
Mark placement of mounting brackets.
2.
Drill small starter holes
(if necessary)
in mounting surface.
3.
Attach cable deck or wall mount to mounting surface.
4.
Check cable length required, cut cable and strip approximately ½" of the protective jacket.
5.
Follow numbered instructions
(as illustrated below)
.
INSERT
CABLE
THROUGH
EYELET IN
ENDCAP
2
3
A)
PULL
CABLE
THROUGH
EYELET
UNTIL TAUT
B)
MARK CABLE
4
A)
DETACH
JACKSCREW
FROM CABLE
MOUNT
B)
PULL CABLE
THROUGH EYELET
AND DOUBLE CRIMP
(PROVIDED)
ABOVE THE MARK
5
A)
TRIM
½” (13mm)
ABOVE CRIMP
B)
PULL CABLE
TAUT AND REATTACH
JACKSCREW
TO CABLE MOUNT
C)
REPEAT ON
THE OPPOSITE SIDE
1
Attach Jackscrew to
Wall or Deck Mount.
Wall
Mount
Deck
Mount
Jackscrew
Hem Bar
Guide Cable
OR
to Headbox
Shade
page 4 of 8
Exterior FlexShade
®
- Clutch
Exterior window shade with smooth, quiet operation, and independent control
