background image

5.4  CONNECTION TO THE POWER SUPPLY

Make sure the power supply information on the machine’s rating plate are compatible with the 
power supply you intend to connect it to. 
This compressor comes supplied with a UK standard 3 pin plug fitted. It is designed for connection 
to a domestic power supply rated at 230V AC. 
Because it is constructed mostly of metal parts, it is a Class 1 machine; meaning, it must have an 
earth connection in the power supply. This is to prevent electrocution in the event of a failure.

Apart from replacing the fuse in the plug, no other electrical work is recommended on this 
compressor.

8. PREPARING THE COMPRESSOR

5. HEALTH & SAFETY INFORMATION

Note:

 Remove the plug from the socket before 

carrying out adjustment, servicing or maintenance.

8.1 LOCATION AND ASSEMBLY – FIG. 1

It is extremely important to install the compressor in a 
clean, well ventilated area where the surrounding air 
temperature will not be more than 40°C. A minimum 
clearance of 500mm between the compressor and a 
wall is required.
In addition to pneumatic air tools, your compressor 
may be connected to several accessories suitable for 
blowing, washing and spraying. For technical 
specifications and detailed instructions, please refer 
to the instructions provided for the individual 
accessory.
1.  Using a suitable spanner (not supplied) screw the 

air outlet quick connector 

onto the air outlet 

; A small amount of PTFE tape may be 

required on the threads to prevent air leaks. Then 
turn the pressure regulator clockwise 

 to fully 

open.

8.2  INITIAL STARTUP – FIG. 2

1.  Insert a loose euro coupling into the euro 

connector (see 9.1). 

2.  Switch the ON/OFF button 

 to the “ON” 

position to start the compressor.

3.  Run the compressor for 30 minutes allowing the 

pressure to escape.

4.  Turn the pressure regulator fully 

counter-clockwise allowing pressure to build up. 
Once the maximum pressure is reached, the 
pressure switch will automatically turn the 
machine off.

5.  Turn the compressor off, by pressing the ON/OFF 

button to “OFF” position and open the regulator 
valve allowing the air to escape.

9

12

FIG. 2

FIG. 1

Содержание DA6/181





















Отзывы: