4. INTRODUCTION
10. TROUBLESHOOTING
4.1 SCOPE
The compressor in this manual is capable of supplying compressed air to a maximum
pressure of 8bar to operate pneumatic tools for a variety of applications including blowing,
spraying and tyre inflating.
4.2 SPECIFICATION
Stock no........................................................................................................................ 02116
Part no ...................................................................................................................... DA6/181
Motor:
Rated voltage ...................................................................................................... 230V~
Rated frequency .................................................................................................... 50Hz
Rated input ............................................................................................ 1200W (1.5HP)
Revolutions per minute (no load) .................................................................. 4,000min-
1
Max. working pressure .................................................................................... 116psi (8bar)
Air displacement ...................................................................................... 6.5cfm (185L/min)
Free air delivery ...................................................................................... 5.1cfm (145L/min)
Receiver capacity .............................................................................................................. 6L
Sound pressure level................................................................................................ 85dB(A)
Sound power level ................................................................................................ 97dB(A)
*Single value noise level ........................................................................................ 94dB(A)
Dimension (LxWxH)................................................................................ 410 x 310 x 540mm
Weight ........................................................................................................................ 11.5kg
4.3 HANDLING & STORAGE
This compressor is designed to be moved to different locations. Ensure it is always
operated on a level surface. When in transit care should be taken not to cause damage
particularly to gauges and air lines.
*A-Weighed sound power level in accordance to 2000/14/EC
5
16
Excessive starting
and stopping (auto
start).
Excessive condensation in
tank
Drain tank more often.
Air leaking from
unloader on
pressure switch.
Check valve stuck in an open
position.
Service/repair/replace.
Excessive moisture
in discharge air.
1. Excessive water in tank.
2. High
humidity.
1. Drain
tank.
2. Move to area of less humidity; use
air line filter.
Note:
Water condensation is not
caused by compressor malfunction.
Compressor runs
continuously and
safety valve opens
as pressure rises.
1. Defective pressure switch.
2. Defective safety valve.
1. Service/repair/replace.
2. Service/repair/replace.
