Draper D16/16 Скачать руководство пользователя | Manualshive

Страница: 1 / 20

background image

DRILL PRESS

■

STOCK No.36389

■

PART No.D16/16

52062

D16/16F

• INSTRUCTIONS •

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE

SAFE AND EFFECTIVE USE OF THIS TOOL.

GENERAL INFORMATION

This manual has been compiled by Draper Tools and is an integrated part of the power tool equipment, which
should be kept with the machine.

This manual describes the purpose for which this tool has been designed and contains all the necessary
information to ensure its correct and safe use.We recommend that this manual is read before any operation of
the machine, before performing any kind of adjustment to the machine, and prior to any maintenance tasks. By
following all the general safety instructions contained in this manual, it will ensure both machine and operator
safety, together with longer life of the tool itself.

All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
machine.

Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tool
policy of continuous improvement determines the right to make modifications without prior warning.

02/2001

1
2
3
...
»

Содержание D16/16





















Отзывы:

Нет отзывов

Похожие инструкции для D16/16

Бренд: Lambda Страницы: 25

Бренд: Gallagher Страницы: 96

Бренд: B&B Страницы: 3

Бренд: E-Lite Страницы: 4

COOPER POWER SERIES

Бренд: Eaton Страницы: 24

Cabrio Lighting Series

Бренд: EasyPro Страницы: 4

Бренд: SAC Страницы: 80

Бренд: Hilti Страницы: 32

PSBEN 3012C/LCD

Бренд: Pulsar Страницы: 44

Бренд: Southwire Страницы: 19

Бренд: Premium Tool Страницы: 4

Бренд: RIDGID Страницы: 2

Бренд: Universal Tool Страницы: 2

Бренд: Lux Tools Страницы: 36

Бренд: ZALMAN Страницы: 24

Бренд: Giovenzana Страницы: 54

Бренд: Parkside Страницы: 258

Belleta iPB Series

Бренд: TDK Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды