6. Screw the three downfeed handles into the
three holes located in the pinion shaft, as
shown in Fig.6.
ASSEMBLY Cont'd
- 11 -
Fig.6.
H
10. Now carefully slide the depth stop rod
Fig.10. through the hole in the head casting
and into the hole located in the chuck
guard. Now secure the depth setting rod by
tightening nut (Fig.9), as shown in Fig.11.
9.
Remove nut Fig.9. from the depth stop.
7.
From the loose parts locate the chuck guard
and depth setting rod . Loosen
screw . Fig.7.
R
Q
P
T
R
Q
O
P
Fig.7.
Fig.8.
Fig.9.
Fig.10.
Fig.11.
8.
Now slide the chuck guard onto the collar as
shown in Fig.8. Secure by tightening screw .
H
Q
O
P
Q
R
P
T
R
Содержание D13/5A
Страница 19: ...19 NOTES...
