- 11 -
8. ASSEMBLY
FIG.9
FIG.10
FIG.11
FIG.12
8.3 LANCE ASSEMBLY – FIGS. 9 – 10
– If not already in place, make sure the rubber
gasket
$
and compression fittings
%
and
&
are arranged onto the lance
in
the correct order, as shown in FIG.9.
– Slide the the end of the lance into the trigger
assembly
.
– Screw the compression fitting
&
to secure
the trigger and lance.
8.4 NOZZLE ASSEMBLY – FIG. 11
– If not already in place, make sure the rubber
gasket
'
and compression fitting
(
are
in place on the end of the lance.
– Slide the nozzle
onto the end of the
lance.
– Tighten the compression fitting to secure the
nozzle in place.
8.5 ATTACHING THE HOSE – FIG. 12
– If not already in place, make sure the rubber
seal
)
is in situated on the hose inlet
.
– Insert the suction tubing
of the hose
into the spray bottle through the hose
inlet
.
– Screw the compression fitting
*
to secure
the hose in place.
)
*
$
%
&
&
'
(
