manualshive.com logo in svg

Draper 80880, Руководство пользователя, Страница: 7 / 24

Поделиться
Скачать
Draper 80880 Скачать руководство пользователя страница 7

5.  HEALTH AND SAFETY INFORMATION

11. OPTIONAL ACCESSORIES

for the user to avoid fatigue during use.

-  Do not put hands or feet near rotating parts.
-  Ensure the engine is stopped and disconnect the spark ignition lead:
  •  whenever you leave the machine.
  •  before clearing entangled debris.
  •  before checking, cleaning or working on the machine.
  •  after striking a foreign object. Inspect the machine for damage and make repairs as 

necessary.

  •  if the machine starts to vibrate abnormally. Stop the engine immediately before 

inspecting.

5) Maintenance

-  Never modify this brush cutter in any way.
-  Always maintain the brush cutter in good working order and regularly serviced by an 

authorised agent.

-  Only use replacement parts supplied by the manufacturer.
-  Ensure the spindle/cutting means does not rotate while the brush cutter is at idle.
-  All safety devices must remain fitted and functional.
-  Use only fresh, clean and good quality fuel/oil mix in this brush cutter.
-  Never refuel in close proximity to naked flames, sparks or other sources of ignition, e.g. a 

cigarette.

-  Allow engine to cool before refuelling.
-  Ensure the correct ratio of fuel and oil are used.
-  Do not set down a hot brush cutter on or near easily combustible material e.g. dry leaves or 

grass.

-  Move away from the refuelling area before restarting the brush cutter.
-  Store fuel for short periods only and avoid mixing more than is required. Store in a 

container specifically designed for petrochemical applications away from heat and direct 
sunlight.

-  Wipe up and correctly dispose of any fuel spillage immediately with a suitable medium.
-  Regularly check external nuts and fixing to ensure vibration caused by normal use has not 

begun to loosen them.

6) Storage

-  After each use clean the brush cutter thoroughly.
-  Remove the spark plug ignition lead from the back of the spark plug and position the lead 

to avoid accidental reconnection.

-  Locate the machine out the reach of children, in a dry locked unit.
-  Remove all residual fuel from the fuel tank before storing.

- 7 -

- 18 -

STOCK No.

3-tooth metal blade

85279

AGTP33-BLD

Line trimming head

17772

AGTP32-84

PART No.

ITEM

Содержание 80880

























Отзывы:

Нет отзывов