Draper 71095 страница 1 Скачать руководство пользователя

Страница: 1 / 11

GAS/GASLESS

160A

MIG

WELDER

71095

These instructions accompanying the product are the original instructions. This document is part of the product,

keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions

before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,

and contains all the necessary information to ensure its correct and safe use. By following all the general safety

instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the

product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the

product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper

Tools policy of continuous improvement determines the right to make modifications without prior warning.



Содержание 71095












Результаты поиска

Содержание 71095

Отзывы:

Похожие инструкции для 71095

Бренды по названию

Популярные бренды

Draper 71095, Инструкция по эксплуатации

Результаты поиска

Содержание 71095

Отзывы:

Похожие инструкции для 71095

Бренды по названию

Популярные бренды