Draper 63124, Инструкция по эксплуатации

Страница: 10 / 12

- 9 -
Regular inspection and cleaning reduces the necessity for maintenance operations and will
keep your tool in good working condition. The tool bearings are life long lubricated. The
motor must be correctly ventilated during tool operation. For this reason avoid blocking the
air inlets with hands. After use disconnect the tool from the power supply and clean carefully,
use compressed air through the ventilation slots.
DISPOSAL
At the end of the machines working life, or when it can no-longer be repaired, ensure that it is
disposed of according to the standard regulations of the country in which it is being used and
that the disposal operation is carried out by specialized personnel following authorized
guidelines.
In all circumstances:
- Do not abandon in the environment;
- Do not dispose of together with solid urban waste products;
- Contact the special recycling centres
WARNING
Disconnect the plug from the power supply socket before replacing any parts.
IMPORTANT: All operations should only be performed by an authorized person.
MAINTENANCE AND
PART REPLACEMENT
OPTIONAL ACCESSORIES
PART No.
SD5V
SD5V
SD5V
SD5V
SD5V
SD5V
SS5V
SB5V
STOCK No.
63367
63368
63369
63370
63371
63372
63469
63470
SIZE
125mm
125mm
125mm
125mm
125mm
125mm
125mm
125mm
GRIT
60
80
100
120
180
Assortment
PACKED
5 Sheets
5 Sheets
5 Sheets
5 Sheets
5 Sheets
5 Sheets
One
One
ADDITIONAL ACCESSORIES
Polishing
Sponge
Polishing Bonnet
Hole Punched Sanding Discs: