11.1 DISPOSAL
- At the end of the machine’s working life,
or when it can no longer be repaired,
ensure that it is disposed of according to
national regulations.
- Contact your local authority for details of
collection schemes in your area.
In all circumstances:
• Do not dispose of power tools with
domestic waste.
• Do not incinerate.
• Do not abandon in the
environment.
• Do not dispose of WEEE* as
unsorted municipal waste.
* Waste Electrical & Electronic Equipment.
4. TECHNICAL DESCRIPTION
3. INTRODUCTION
5. IMPORTANT
11. DISPOSAL
- Recommended Water Pressure: 0.5 – 12
bar. In higher pressure areas, use a
pressure reducer.
- Recommended Operating Temperature:
4° to 60°. It is recommended to remove
the timer from the tap during colder
months and when temperatures drop
below 4°. The timer should not be
subjected to freezing temperatures or
frost.
- Recommended Water Source: Use cold
mains water only. If you are using a
gravity fed watering system, ensure that
you use a tap filter. Do not use any bore
or unfiltered water. Do not use any kind
of pump to draw water. Do not use if the
water supply is unstable. Do not use any
liquids other than water.
6. INSTALLATION
- The Draper Water Timer is best suited to
a cold mains fed system.
- The timer connects to the tap using the
1" connector or ¾" reducer supplied.
- Using a hose connector (not supplied),
connect the hose directly to the timers,
½" connector.
- Set the required watering time on the
dial before timing the water on.
7. GET STARTED
This mechanical timer is very easy to use. It
functions like an egg timer allowing you to
set a watering time of up to 120 minutes. If
you just want regular water flow from the
tap, turn the dial to MANUAL and water will
flow freely.
8. WATER WITHOUT
TIMING
(Turn water on and off without having to
remove timer from the tap)
- Turn the dial anti-clockwise to MANUAL
to turn on the water flow.
- To stop water flow, turn the dial
clockwise to ‘0’
9. SET A WATERING TIME
(Ideal for use with sprinklers and other
watering systems)
- IMPORTANT: Make sure your
sprinkler/watering system is set up
correctly before continuing. As soon as
the dial is turned, the valve opens
allowing water to flow. It is
recommended to set the timer first and
then turn on the tap.
- Turn the dial clockwise so the arrow on
the dial points to the desired watering
time. Watering will begin immediately.
- When the timer reaches ‘0’, the valve will
close automatically and stop the flow of
water.
10. TIMER CARE &
MAINTENANCE
- Keep clear of any dirt or debris which may
block the valve and cause the timer to
malfunction.
- Disassembling the timer improperly will
void all warranties.
3.1 SCOPE
This timer allows setting watering time easy
dial with manual on/off and clear digital
display
3.2 SPECIFICATION
Stock No................................................ 36748
Part No. ................................................ WTM1
Inlet .............................. 1"BSP Female with a
....... ¾"BSP female adaptor ring with filter.
Outlet....................... ¾" BSP Male with a ½"
.............................................. hose connector
3.3 HANDLING & STORAGE
Do not drop this machine.
Store out of the reach of children.
Dial
Water inlet
Water outlet
