manualshive.com logo in svg

Draper 16128, Руководство пользователя, Страница: 25 / 28

Поделиться
Скачать
Draper 16128 Скачать руководство пользователя страница 25

– 25 –

EN

Problem

Possible cause

Remedy

The engine does not start.

The fuel level is too low.

Check the fuel level and top it up if 

it is low (see 8.2 Fuelling).

The fuel lever is in the lowest 

position.

Move the fuel lever to a higher 

position and attempt to start the 

engine.

There is no spark from the spark 

plug.

Remove and check the spark plug 

(see 10.5 Spark Plug Care).

The cause is not listed or cannot be 

identified.

Contact an authorised service 

agent for repair and replacement 

options.

The pump fails during use.

The priming water level is low.

Check the pump housing water 

level and top it up if it is low  

(see 9.1 Priming the Pump).

The strainers are clogged.

Remove the strainers from the 

suction and discharge hoses and 

clean them if they are blocked.

The hoses are not airtight.

Ensure that the hose clamps are 

securely fastened and check the 

hoses and seals for damage and 

splits.

The suction hose is blocked.

Check that the end of the suction 

hose is not submerged in mud or 

sediment and ensure that the hose 

is not bent or crushed.

The impeller is blocked or 

damaged.

Clean or replace the impeller  

(see 10.2).

The cause is not listed or cannot be 

identified.

Contact an authorised service 

agent for repair and replacement 

options.

13. Troubleshooting

Содержание 16128





























Отзывы:

Нет отзывов