Draper 16128 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 28

Draper 16128 Скачать руководство пользователя страница 12

– 12 –

EN

8.2 Fuelling

Use unleaded petrol ONLY.

1. Remove the petrol cap (2) (Fig. 7).

2. Check that the fuel filter (2.1) is in place and pour the

fuel into the tank (Figs. 8–9).

ATTENTION

DO NOT overfill the tank. Leave an air gap between the

fuel and the roof of the tank.
3. Screw down the fuel cap securely and clean up any

spilled fuel immediately.

WARNING! DO NOT start the engine in the

presence of spilled petrol or petrol vapour as

sparks may cause it to ignite.

4. Move the water pump at least 4m (12ft) away from the

fuelling area before starting.

WARNING!

• Do not refill the fuel tank while the engine is running

or is hot.

• Check to ensure that the petrol cap has been

tightened and that fuel is not leaking.

• Be careful not to admit dust, dirt, water or other

foreign objects into the fuel.

• Wipe off spilt fuel thoroughly before starting the engine.

• Ensure you do not fuel the pump in close proximity to

any open flames.

9

Fig.

8

Fig.

7

Fig.

8. Setting the Water Pump

(2)

(2.1)

«
...
10
11
12
13
14
...
»

Содержание 16128





























Отзывы:

Нет отзывов