7. UNPACKING AND CHECKING
Front grille.
Fan blade.
Rear grille.
Clips.
Fan body.
Fan pivot point.
Fan motor.
Clamp nut.
Remote control.
Wall bracket.
Safety screw.
Wall plugs.
Screws.
Power lead.
7.1 PACKAGING
Carefully remove the machine from the packaging and examine it for any sign of damage that may
have happened during shipping. Lay the contents out and check them against the parts shown
below. If any part is damaged or missing; please contact the Draper Helpline (the telephone
number appears on the Title page) and do not attempt to use the machine.
The packaging material should be retained at least during the guarantee period: in case the
machine needs to be returned for repair.
Warning!
Some of the packaging materials used may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make sure they are disposed of correctly; according
to local regulations..
7.2 WHAT´S IN THE BOX?
The packaging contains several parts and semi-assembled elements that require final assembly.
Lay out the contents and check off the items against those featured below.
- 9 -
- 12 -
8. ASSEMBLING THE FAN
Carefully attach the front guard to the rear guard aligning the
safety screw hole at the base of both guards.
When aligned push the clips in to secure the grille, and tighten the
safety screw
. DO NOT use the fan without both guards
securely in place.
The fan must be correctly installed before use.
Caution:
to prevent the fan from falling off, do not install it on walls
that are unable to correctly support the weight and load of the fan
unit. If in any doubt seek advice from an appropriate qualified
person.
1. The mounting bracket
must clip securely into the metal
holder on the rear of the fan
.
Fix the supplied mounting bracket firmly to the wall using the
two screws or alternative correctly specified fixings.
Note:
The bracket should be a minimum of 50cm from the
ceiling and any adjoining wall and away from doors, windows
and moveable fabrics (curtains etc).
2. Installing the fan:
Mount the fan on the bracket by inserting the hook on the rear of
the fan into the slot on the wall bracket.
