DRAKE ENCODER HOST EH244 Скачать руководство пользователя страница 2

Страница: 2 / 20

A product and cart combination should be moved with care. Quick stops, excessive
force and uneven surfaces may cause the product and cart combination to overturn.

The lightning flash with arrow head symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.

TABLE OF CONTENTS AND CAUTION STATEMENTS
IMPORTANT SAFETY INSTRUCTIONS
Chapter 1 – INTRODUCTION

GENERAL

DESCRIPTION

MODELS / OUTPUT CONFIGURATIONS

Chapter 2 – INSTALLATION AND MOUNTING

EAS - Modes (Emergency Alert Services)

DTA - Modes (Digital Transport Adapter)

Chapter 3 - CONFIGURATION

Front Panel Con

guration

Ethernet Control Interface Con

guration

Chapter 4 - IMPORTANT NOTES
Chapter 5 – DATA

SPECIFICATIONS

LIMITED

WARRANTY

TECHNICAL SUPPORT / SERVICE INFORMATION

Caution Statements:

TABLE OF CONTENTS AND CAUTION STATEMENTS

WARNING:

TO PREVENT FIRE OR ELECTRICAL SHOCK, DO NOT

EXPOSE TO RAIN OR MOISTURE

***NOTE: Connect and apply power only after all other connections are made.***

................................................................................ 2

........................................................................................................ 3

........................................................................................................................ 5

.............................................................................................................................. 5

.................................................................................................... 5

............................................................................................. 6

........................................................................................... 6

............................................................................................. 7

....................................................................................................................... 8

.................................................................................................................... 8

............................................................................................. 10

................................................................................................................... 16

........................................................................................................................................... 17

................................................................................................................................ 17

.......................................................................................................................... 18

.......................................................................... 19

WARNING:

THE SOCKET

OUTLET

SHALL BE INSTALLED
NEAR THE EQUIPMENT
AND SHALL BE EASILY
ACCESSIBLE.

Содержание ENCODER HOST EH244





















Результаты поиска

Содержание ENCODER HOST EH244

Отзывы:

Бренды по названию

Популярные бренды

DRAKE ENCODER HOST EH244, Инструкция по эксплуатации

Результаты поиска

Содержание ENCODER HOST EH244

Отзывы:

Бренды по названию

Популярные бренды