DRAKE 1002613A, Инструкция по эксплуатации

Страница: 22 / 32

22
937.746.4556 |
www.rldrake.com
Setting the UTC Time (continued):
Method 1B:
1. Set DHCP to disable on SFP Video
2. Enter your desired IP Address and a valid gateway
3. Enable HTTP Server
4. Set DNS Settings to Manual
5. Under Primary DNS, enter your network DNS
6. If none is available, you can use google DNS of 8.8.8.8, but your gateway must be able to reach the internet.
Method 1C:
1. Set valid IP under control port settings and a valid gateway
2. Set DNS Settings to Manual
3. Under Primary DNS, enter your network DNS
4. If none is available, you can use google DNS of 8.8.8.8, but your gateway must be able to reach the internet.
Unit Description: Unit Name and User Location are user-defined fields to make identification easier.
SNMP Settings: Simple Network Management Protocol (SNMP) monitoring for the unit. Settings include:
Trap Target IP, Trap Target Port, and System Contact .
Web Settings: User Timeout - Range is 5 to 30 minutes (increments of 5)
System Configuration Tab: Networking
6
7
Figure 6b - "System" Tab - Networking (Part 2)
6
7
5
5
4