manualshive.com logo in svg

DRAKE 1002606A, Инструкция по эксплуатации

Поделиться
Скачать
DRAKE 1002606A Скачать руководство пользователя страница 21

21

800-523-6049

 | 

www.rldrake.com

System Configuration Tab: Networking

The system configuration tab allows the user to set Ethernet and SNMP settings.

In the first section, the Network Configuration Mode can be set to either advanced or simple mode. The 

differences between these modes are as follows:

• Advanced Mode:

 enables the SFP output port and associated settings.

• Simple Mode:

 allows streaming out the front-panel control port and disables the SFP port.

SFP Video Network Settings:

 

Mac Address:

 read-only field that indicates the MAC Address of the “SFP Output” Port.

DHCP Enable:

 Enables or Disables DHCP on the SFP Output.

IP address:

 the static IP address that is assigned to the SFP Network Output. (Default: 172.16.80.1)

Subnet Mask:

 the subnet mask address of the SFP Network Output.

Default Gateway:

 The Gateway Address of the SFP Network Output.

HTTP Server Enable:

 “Enabled”: This allows management capability on the same SFP port (SFP port IP 

Address) as the streaming video.

Link Speed (copper only):

 Default setting is Auto, see Figure 6a for options.

VLAN Enable:

 Enables or Disables VLAN.

VLAN Tag:

 allows the user to set the defined VLAN Tag for the unit.

SFP Control-Only VLAN Settings:

 Enables or disables VLAN Settings for Control-Only.

Control Port Ethernet Settings:

 are defined here for the control port.

MAC Address:

 read-only field that indicates the MAC Address of the “Control 100/1000” Port.

IP Address:

 the static IP address that is assigned to the unit, allowing the user to access it via the web interface.

Subnet Mask:

 the Subnet Mask address of the unit, allowing the user to access it from another network via the 

web interface.

Default Gateway:

 the gateway address of unit, allowing the user to access it from another network via the web 

interface.

DNS Settings:

 

DNS Mode:

 Options are 

DHCP Provided

 or 

Manual

 mode. When in 

manual

 mode, enter Primary, Secondary 

name servers and/or Search Domains in the space provided.

Name Servers:

 Read-only field that indicates conversion from domain names to IP addresses. 

Setting the UTC Time:

Method 1A:
1. Set DHCP enable on SFP Video

2. Enable HTTP Server

3. Set DNS settings to DHCP Provided

1

3

2

Содержание 1002606A

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды