DRAKE 1002606A Скачать руководство пользователя страница 13

Страница: 13 / 32

800-523-6049

www.rldrake.com

Allows the user to set Global, Primary Steam, SD-only Stream Settings for their PEG encoder.

Global Configuration:

Sets global settings that apply to both streams and the possible outputs

Video Source:

Displays only on PEG-NE24-IP-C model. Video input selection of SDI or Composite. PEG-NE24

IP is SDI input only.

Audio Source:

Displays only on PEG-NE24-IP-C model. Audio input selection of SDI or Analog (L/R). PEG-

NE24-IP is SDI input only.

Audio Synchronization:

A/V lip-sync adjustment used to adjust your audio to video synchronization. For

example, you may need to delay or lag your audio if your video input is SDI and your audio source is analog.

Stream Enable:

Stream combinations available.

Disable:

Encoder is not streaming

Native:

Encoder is streaming HD or SD stream depending on the video input HD or SD source.

SD Only:

The encoder is streaming a SD stream no matter if the encoder input is HD or SD source.

SD:

Encoder is streaming a HD and SD stream or a SD stream and SD stream depending on your

video input HD or SD source.

Native Resolution:

The Primary stream settings sets parameters for streaming HD or SD stream

depending on the video input HD or SD source.

Video Settings:

Video Encoder Format:

MPEG-2 or MPEG-4/H.264

SD Video Bitrate (Mbps):

2 to 8 incremented by 0.1 in MPEG2, and 1 to 4 in H.264

HD Video Bitrate (Mbps) (Primary Stream Settings):

8.5 to 19.0 incremented by 0.1 in MPEG2 and

3.5 to 13.0 in H.264

NOTE:

Once an input is applied, only the detected resolution will be displayed. Both SD & HD video

bitrates are displayed only when no input is detected.

Video Mode Flag:

Frame-only

and

Field-only

, adjusts video encoder modes for decoder compatibility

Frame-Only:

Frame encoding mode. Use Frame-Only mode when video input is progressive for example

720P. Frame-Only mode can be used to encode interlaced video, for example 480i or 1080i.

Field-Only:

Field encoding mode. Use Field-Only mode when video input is interlaced for example 480i or

1080i. Some decoders may have compatibility issues when decoding field encoding.

NOTE:

If the video input is 720P the encoding mode will automatically default to Frame-only mode, even if

Field-Only mode is selected in the menu.

Aspect Ratio:

Affects only SD 480i inputs. Video display can be set for 4:3 (normal SD) or 16:9 (widescreen)

Audio Settings

Audio Encoder Format:

Select

MP2

for MPEG-1 Audio Layer 2;

AC-3

for Dolby Digital AC-3;

AAC

(Advanced Audio

Coding)

Audio DialNorm:

Adjustable from -1 to -31 dB. Provides meta-data for audio playback gain for Dolby AC-3

compression.

Audio Bitrate:

128, 192, 320, or 384 Kbps.

Note

: 320 Kbps is not available under AC-3 encoding.

Encoder Tab: Basic Screen

Содержание 1002606A

































Результаты поиска

Содержание 1002606A

Отзывы:

Бренды по названию

Популярные бренды

DRAKE 1002606A, Инструкция по эксплуатации

Результаты поиска

Содержание 1002606A

Отзывы:

Бренды по названию

Популярные бренды