DragonLink V3, Руководство пользователя

Страница: 19 / 45

The DragonLink transmitter is capable of providing a range of audible warnings to the
user.
Missing PPM: Triggered by a loss of input from the radio controller’s trainer jack or
module bay connection.
Low TX voltage: User-configurable low input-voltage alarm.
Low flight voltage: Triggered by low voltage reading from optional DragonLink Voltage
Sensor (requires active telemetry link).
Low RX RSSI: User-configurable low signal strength alarm.
Change power level: Either one, two, or three beeps will be played to correspond
with the selection of either low , mid , or high power levels, respectively. When using
Auto power level modes only, disabling this alert is recommended (see section
4.1.3).
Micro Power mode*: Plays a repeating audio reminder while the transmitter is in
micro power (range test) mode.
Servo test mode*: Plays a repeating audio reminder while the transmitter is in servo
test mode.
Bind mode*: Plays a repeating audio reminder while the transmitter is in bind mode.
* It is recommended that these reminders be enabled to ensure the model aircraft is
not inadvertently launched while the transmitter remains in a mode that may cause
loss of control or damage.