Dragon Wholesaling LF750, Руководство пользователя

Страница: 23 / 48

Manual
V 1.7
Page 22 of 47
Check Fittings
The Dragon Equipment LF750 Lifter is subject to large loads during its normal course of operation.
Therefore, there is a possibility that nuts and bolts and other fastenings can lose their torque over
time. It is vital that checks are made at regular intervals to ensure the security of these fasteners by
using a torque wrench to the required torque (see below).
NOTE: Uncalibrated torque wrenches can be inaccurate by as much as 25%. It is therefore essential
that a calibrated torque wrench is used to achieve the tightening torques.
Size Pitch Torque lb-ft Torque Nm
General Bolt M8 Standard 20 27
General Bolt M10 Standard 45 61
General Bolt M12 Standard 65 88
Hazardous Materials and End of Machine Life
The following hazardous materials are within Dragon Equipment machines:

Engine oil.

Petrol.

Grease.

Hydraulic oil.
MATERIAL SAFETY DATA SHEETS FOR HAZARDOUS MATERIALS ARE AVAILABLE ON REQUEST. REFER
TO THESE FOR FIRST AID AND FIRE PROTECTION MEASURES.
Recommended procedures and safety precautions must be followed for safe handling, removal and
disposal of hazardous materials. Avoid direct contact and store in a cool, well-ventilated area away
from sources of ignition, strong oxidising agents and strong acids. Ensure any spillages are dealt with
immediately in accordance with the local/regional law by preventing any ground or drainage system
contamination.
End of machine life
At the end of the machine’s life, follow approved local waste and disposal methods for recycling
materials, while ensuring you adhere to all applicable local/regional Health and Safety and
Environmental laws. If disassembling the machine structure, refer to the maintenance instructions
while being aware of any parts with mechanical pressure or tension applied. It is recommended that
items are separated into material groups where possible and recycled using appropriate local
agencies. Once decommissioned, supply the serial number to Dragon Equipment to close the
machine’s records.