Dragon Wholesaling LF750, Руководство пользователя

Страница: 21 / 48

Manual
V 1.7
Page 20 of 47
components are changed, new seals should be installed during reassembly. Fittings should then be
retightened.
Changing Hydraulic Oil Filter

Undo filter cap as shown in Figure 9.

Partially remove the filter and allow oil to drain for five minutes.

Remove filter once all hydraulic oil has drained.

Install a new filter element and refit the filter cap to the filter housing. Take care, not to over
tighten the three bolts.
Figure 9: Changing the Hydraluiic Oil Filter
Changing Hydraulic Oil and Filter

Remove the drain plug and allow oil to drain into a suitable container.

Undo filter cap as shown in Figure 9.

Partially remove the filter and allow oil to drain for five minutes.

Clean the magnet and refit the drain plug. Note: presence of excessive debris.

Refill with VG 32 hydraulic oil to Nominal Oil Level – Approximately 23 litres as shown below.

Install a new filter element and refit the filter cap to the filter housing. Take care, not to over
tighten the three bolts.
Figure 10: Hydraulic Oil level
1. Undo the 3 Bolts on black cap ONLY.
2. Remove black filter cap - taking care of retention spring.
NOTE : Use plastic gloves to keep oil off
skin and dispose of the used oil and
filter in an ecologically sound way.
Nominal Oil Level
{
Safe Level
Breather cap, unscrew to top up oil.
2. Filter housing and
main filling point for
oil change.
1.