www.dragino.com
LIG16 Indoor LoRaWAN Gateway User Manual
41 / 46
7.
Linux System
The LIG16 bases on OpenWrt Linux System. It is open source, and user are free to configure and
modify the inside Linux settings.
7.1
SSH Access for Linux console
User can access to the Linux console via SSH protocol. Make sure your PC and the LIG16 is in the
same network, then use a SSH tool (such as
) to access it. Below are screenshots:
IP address: IP address of LIG16
Port:
22 or 2222
User Name:
root
Password:
dragino
(default)
After log in, you will be in the Linux console and type command here.
The “logread
-
f” command can be used to debug how system runs.