www.dragino.com
LIG16 Indoor LoRaWAN Gateway User Manual
10 / 46
2.
Access and configure LIG16
The LIG16 is configured as a WiFi Access Point by default. User can access and configure the
LIG16 after connecting to its WiFi network, or via its Ethernet ports.
2.1
Find IP address of LIG16
2.1.1
Connect via WiFi
At the first boot of LIG16, it will auto generate an unsecure
WiFi network call
dragino
-
xxxxxx
the password is: dragino
User can use the laptop to connect to this WiFi network. The
laptop will get an IP address 10.130.1.xxx and the LIG16 has
the default IP
10.130.1.1
2.1.2
Connect via WAN port with DHCP IP from router
Alternatively, connect the LIG16
WAN port
to your router and LIG16 will obtain an IP address
from your router. In the router’s management portal, you should be able to find what IP address
the router has assigned to the LIG16. You can also use this IP to connect.