manualshive.com logo in svg

Dräger BiliLux, Инструкция по эксплуатации

Поделиться
Скачать
Dräger BiliLux Скачать руководство пользователя страница 45

Instructions for use BiliLux

45

Operation

8.1.3

Positioning the BiliLux with spring arm and BiliLux with trolley 
at a radiant warmer

WARNING

Risk of patient injury and damage to the device

Positioning the phototherapy light under the radiant heat source may block heat 
transfer to the patient and may damage the phototherapy light.

►

Do not position the phototherapy light directly in the path of heat rays from the 
radiant warmer.

►

If the phototherapy light is positioned directly under a radiant warmer, switch off 
the radiant warmer and closely monitor the patient’s temperature.

CAUTION

Risk of injury

The surfaces of the phototherapy light and the spring arm may become hot when 
used incorrectly with radiant warmers. 

►

Take proper precautions when touching hot surfaces.

1

If the device is equipped with a trolley, adjust the height of the trolley as desired 
using the adjustment knob. If equipped with spring arm without trolley, proceed 
to step 4.

2

Roll the trolley under the radiant warmer. Keep the distance between the trolley 
and the radiant warmer to a minimum.

3

Lock the castors to prevent movement of the trolley.

CAUTION

Risk of injury

Cables or attached accessories may be inadvertently disconnected or otherwise 
compromised when adjusting the spring arm.

►

Take care not to compromise cables or accessories when adjusting the spring 
arm to the desired position.

4

Adjust the spring arm to the desired height and position.

CAUTION

Risk of injury

The LED panel on the phototherapy light may be hot to the touch.

►

Adjust the phototherapy light only by touching the housing. Do not touch the 
LED panel.

5

Position the phototherapy light:

Ensure that the phototherapy light is not positioned in the path of heat rays 
from the radiant warmer (Fig 1).

If the phototherapy light is positioned directly under a radiant warmer, for 
example when in use with the BiliLux light shield curtain, switch off the 
radiant warmer and closely monitor the patient’s temperature (Fig 2).

Содержание BiliLux



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды