D
-5755-2018
Disassembly
/Assembly
Neonatal Flow Sensor
Remove the flow sensor housing
from the ypiece.
Fit the breathing hoses to
the neonatal flow sensor.
Disconnect plug of the flow
sensor cable from the
neonatal flow sensor.
Connect plug of the flow
sensor cable to the
neonatal flow sensor.
Fit the insert into
the flow sensor.
Gently press the knobs on
both sides while removing the
insert out of the neonatal
flow sensor.
Dräger Babylog
®
V-Series
Neonatal Expiratory Valve
Machine cleaning
Dräger Neonatal Flow Sensor
Disassembly/Assembly
Connect the hose to the nozzle
of the expiratory valve.
Connect the other end of the
hose to a suitable nozzle on the
load carrier.
Machine cleaning of the Neonatal Expiratory Valve
This guideline does not replace or amend the instructions for use. Please always refer to the
reprocessing instruction in the latest instruction for use of the components. The instructions
for use and the hospital guidelines and policies always have to be observed.
Position the components
(muffler, diaphragm, water trap
container) to be stable.
