DRACAST LED2000, Инструкция по эксплуатации

Страница: 3 / 5

OPERATING INSTRUCTIONS
Powering the light
The Dracast STUDIO Series LED2000 has one power option to choose from.
- A/C Power - Plug the power supply (included) into the XLR port on the back
of your LED2000. Press the power switch to “ON”
Understanding the Controls
Your Dracast STUDIO Series is equipped with full DMX 512 remote functional-
ity. The dimming and color controls (if available) can be controlled either via a
standard DMX controller or locally by using the control panel
on the back of the fixture.
The control panel has an Digital display and four buttons directly below it.
These four buttons perform the following actions.
SETUP - Cycles through each adjustable option. (Currently selected menu item
flashes.)
UP - Adjust the selected item up.
DOWN - Adjust the selected item down.
ENTER - Confirms the current selection.
PHOTOMETRIC DATA
LED2000 STUDIO 5600K
DRS-LED2000-DX
3 ft / 0.9 m 6 ft / 1.8 m 9 ft / 2.7 m 12 ft / 3.6 m
929 fc
10000 lux
321 fc
3450 lux
166 fc
1785 lux
98 fc
1050 lux
LED2000 STUDIO 3200K
DRS-LED2000-TX
794 fc
8550 lux
274 fc
2950 lux
137 fc
1475 lux
84 fc
900 lux
LED2000 STUDIO
3200K - 5600K
DRS-LED2000-BX
376 fc @ 3200K
753 fc @ 4400K
390 fc @ 5600K
4050 lux @ 3200K
8100 lux @ 4400K
4200 lux @ 5600K
127 fc @ 3200K
251 fc @ 4400K
139 fc @ 5600K
1370 lux @ 3200K
2700 lux @ 4400K
1500 lux @ 5600K
65 fc @ 3200K
123 fc @ 4400K
68fc @ 5600K
700 lux @ 3200K
1325 lux @ 4400K
730 lux @ 5600K
39 fc @ 3200K
73 fc @ 4400K
40 fc @ 5600K
420 lux @ 3200K
785 lux @ 4400K
430 lux @ 5600K