DR Whisper Lite CEM1000, Руководство по безопасности и эксплуатации

Страница: 8 / 24

DR
®
WHISPER LITE
®
CORDLESS Electric Mower Safety & Operating Instructions 2
Set-Up Instructions
How To Set-Up Your Lawn Mower
1. Open the top flaps of the carton and remove the inserts. Remove the loose parts, including the
side discharge chute, battery pack, battery charger, battery charger lead and power key (
Figure 1,
page 1 ).
2. Lift the mower from the carton.
3. Pull up and back on the upper handlebar to raise the packing material between the upper and
lower handlebars.
4. Tighten the four hand knobs on the sides of the
lower and upper handlebars.
Note: Your mower is shipped with the handlebar
in the middle height position. To raise or lower
the handlebar, refer to page 7.
5. Place the battery pack into the opening provided
on top of the mower (
Figure 2 ). Push firmly into
place; it will fit in only one position.
6. Make certain all nuts, bolts and screws are
tightened securely.
!
WARNING: Always remove the power key and
battery pack before exchanging the mulching cover and side discharge chute.
7. Your mower has been shipped as a mulcher. To convert your mower from a mulcher to a side
discharge mower, remove the two plastic nuts from the right side of the mower
(Figures 3 & 4).
Remove the mulching cover and place the side discharge chute over the two studs. Secure the
chute firmly with the two plastic nuts.
Figure 2
Figure 3
Figure 4
Push down firmly to seat battery pack.
Discharge
chute
Mulching
cover
Secure plastic nuts firmly