DR ROTO-HOG Premier Power Tiller, Руководство по безопасности и эксплуатации

Страница: 8 / 28

8 DR
®
ROTO-HOG™ Premier Power Tiller
DR ROTO-HOG Premier Power Tiller Specification Sheet
Assembling the Machine
NOTE: Assembling the DR ROTO-HOG Premier Power Tiller is a two-person job, as the Unit weighs 169 pounds. We recommend you
have an extra set of hands available before you begin.
Parts Supplied on Shipping Pallet:

DR ROTO-HOG Premier Power Tiller

Wheel Box:
-
Two Wheels
- Hitch Bracket Extension
-
Bolt, 1/2" x 1-1/4"
- Locknut, 1/2-13
-
Safety
&
Operating Instructions Manual
- Briggs & Stratton Engine Manual
Tools and Supplies Needed:

Pliers
1. Position the Wheels onto the Axle against the Washers and
Cotter Pins that were left on the Axle ( Figure 3 ).
2. Secure the Wheels with the Washers and Cotter Pins that you
removed during unpacking and bend the Cotter Pins with
Pliers.
3. Pull the Lift Handle Forward to lower the wheels ( Figure 2 on
previous page ).
4. Get help from another person to roll the Tiller from the Pallet.
Engine Briggs & Stratton 9.50 FPT, 208 CC, Single Cylinder
Approximate Run Time on a Tank of Fuel 90 minutes
Towing type Pin Hitch
Ground Clearance in Transport Mode 1.5"
Height Adjustment Manual
Range 5.5" deep
Tine Size 12"
Number of Tines 12
Wheels 15" x 6.00"-6 NHS (14" x 5.5")
Machine Size 39"w x 66"L (Transport), 35"H x 77"L (Lowest Position)
Machine Weight 169 lbs
Tongue Weight 90 lbs. (Transport) 112 lbs. (Lowest Position)
Shipping Weight 310 lbs.
Gauge of Steel on Shroud 13
Gauge of Steel on Frame 12 Gauge, 1.5" Tubular Steel
Figure 3
Wheel
Cotter Pin
Flat Washer