background image

 

Contact us at 

www.DRpower.com

          3

 

Chapter 1: General Safety Rules 

Labels 

Your OPTIONAL ACCESSORY for the DR ROTO-HOG POWER TILLER carries prominent labels as reminders for its proper and 
safe use.  Shown below are copies of all the labels that appear on the accessories. Take a moment to study them and make a note 
of their location on your OPTIONAL ACCESSORY for the DR ROTO-HOG POWER TILLER as you assemble and before you 
operate the unit. Replace damaged or missing safety and information labels immediately. 

DR Power Spreader: 

Read this safety & operating Instructions manual before you use the Optional Accessory.  Become familiar with the operation and 
service recommendations to ensure the best performance from your Accessory. If you have any questions or need assistance, 
please contact us at www.DRpower.com or call toll-free 1-800-DR-OWNER (376-9637) and one of our Technical Support 
Representatives will be happy to help you. 

# 234971 

Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. 
Exercise caution at all times when operating equipment. 

 

Read this owners manual before attempting to assemble or operate the ACCESSORY. 

 

Read the vehicle owner’s manual and know how to operate your vehicle, before using the ACCESSORY. 

 

Do not allow anyone to ride on or sit on spreader or culti-packer frame. 

 

Never allow children to operate the vehicle or ACCESSORY. 

 

Do not allow adults to operate the vehicle or ACCESSORY without proper instructions. 

 

WE RECOMMEND WEARING SAFETY SHOES WHEN USING THIS MACHINE. WEAR SHOES WITH NON-SLIP TREADS TO 
IMPROVE FOOTING ON SLIPPERY SURFACES. DO NOT USE THE MACHINE WEARING OPEN SANDALS OR WHILE 
BAREFOOT. 

 

Wear eye and hand protection when handling and using lawn chemicals. 

 

Always begin with the VEHICLE transmission in first (low) and gradually increase speed as conditions permit. 

 

When using the ACCESSORY do not drive too close to a creek or ditch and be alert for holes and other hazards which could 
cause you to loose control of the ACCESSORY and vehicle. 

 

Always operate vehicle and ACCESSORY up and down a slope, never across a slope. 

 

Read instructions and caution notes for handling and application of materials purchased for spreading. 

 

Follow maintenance and lubrication instructions as outlined in this manual. 

Содержание ROTO-HOG POWER TILLER

























Отзывы: