DR POWERWAGON-PRO, Руководство пользователя

Страница: 14 / 48

12
DR
®
POWERWAGON-PRO
Operator Presence Lever
Throttle
Figure 5
Key
Shift Lever
Figure 6
CHAPTER 4: OPERATING YOUR DR POWERWAGON-PRO
This chapter covers the procedures for starting and stopping your new DR POWERWAGON-PRO and
discusses basic operation features.
Before Starting the Engine
1. Check the oil level every time you use the machine
(See
Figure 2 on page 10).
2. Check the gas level ( Figure 2 ).
3. Check the tires for proper inflation.
4. Make sure the Dump Latch is secured.
5. Set the Parking Brake by squeezing the Brake Lever
(
Figure 4 ) on the right Handlebar and lift up on the
Parking Brake Lock ( Figure 4 ), locking the Lever in
place. To release the Parking Brake, just squeeze the
Parking Brake Lever again.
NOTE: The DR POWERWAGON-PRO is equipped with an
Operator Presence Control for added safety. The Operator
Presence Lever must be depressed whenever the Shift
Lever is in gear, or the Engine will stop
.
You may run the
Engine without depressing the Operator Presence Lever
(
Figure 5 ) only if the Shift Lever is in the "N" (Neutral)
position ( Figure 6 ).
Electric Starting
1. Move the Shift Lever to the "N" (Neutral) position
(
Figure 6 ).
2. Set the Choke Lever on the Engine to the CHOKE
position (to the RUN position if the Engine is
already warm,
Figure 7 on page 13).
3. Turn the Key to the START position ( Figure 6 ).
As soon as the Engine starts, release the Key, and
it will return to the RUN position.
4. After the Engine starts, move the Choke Lever on
the Engine (
Figure 7 on page 13) to the RUN
position.
See the Engine Owner's Manual for information on
cold weather starting.
Parking
Brake Lever
Figure 4
Parking Brake
Lock