4
DR
®
5-TON ELECTRIC LOG SPLITTER
This is a high-powered machine, with moving parts operating with high energy. You must operate the machine safely. Unsafe
operation can create a number of hazards for you, as well as anyone else in the nearby area. Always take the following precautions
when using this machine:
Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people, their property, and
themselves.
Always wear protective goggles or safety glasses with side shields while using the Electric Log Splitter to protect your eyes
from possible thrown debris.
Avoid wearing loose clothing or jewelry, which can catch on moving parts.
We recommend wearing gloves while using the Electric Log Splitter. Be sure your gloves fit properly and do not have loose
cuffs or drawstrings.
Wear shoes with non-slip treads when using your Electric Log Splitter. If you have safety shoes, we recommend wearing
them. Do not use the machine while barefoot or wearing open sandals.
Wear long pants while operating the Electric Log Splitter.
Use ear protectors or ear plugs rated for at least 20 dba to protect your hearing.
Keep bystanders at least 50 feet away from your work area at all times. Stop the engine when another person or pet
approaches.
Escaping pressurized fluid from hydraulic system leaks can have enough force to penetrate skin and cause serious injury or death.
Hydraulic fluid can remain pressurized while the motor is off due to the return spring force on the ram. Always follow these
precautions:
Always release residual energy from pressurized hydraulic fluid and allow the fluid to cool before doing any maintenance or
repair work on the Electric Log Splitter.
Please follow these steps to depressurize the system and release residual hydraulic energy before starting any repairs:
o
Unplug the Electric Log Splitter from the power source.
o
Move the operating handle down and up from one limit of travel to the other at least four times. Hold the handle for
three seconds at each limit of travel. The ram should not move during the 4th cycle and should remain fully
retracted.
o
Visit our website at www.drpower.com, call 1-800-DR-OWNER (376-9637), or call a qualified hydraulic mechanic for
assistance to replace worn components.
Never use your hand or any part of your body to check for hydraulic system leaks while the system is pressurized.
Never remove the fill/dipstick cap from the hydraulic fluid port while the motor is running or while the tank is still warm after
the motor is off. Hot pressurized fluid can cause serious injury, so wait for the hydraulic tank to cool before removing cap.
The Electric Log Splitter must be operated on a level surface.
Periodically check for hydraulic fluid leaks by placing a sheet of cardboard under the Electric Log Splitter while the system is
running.
Get professional medical help at once if hydraulic Fluid penetrates anyone's skin.
Never adjust the hydraulic system.
Protect Yourself and Those Around You
Hydraulic Safety
