4. Cut the Universal Deck Adapter.
a)
Drill a Pilot Hole (
Figure 29
) near the Contour Line.
Hole for inserting
Saw Blade
b)
Insert the Blade of the Jig Saw and carefully cut
along the contours until the piece is free from the
Universal Deck Adapter (
Figure 30
). Clean the
burrs from the cut line.
c)
The corners of the Universal Deck Adapter opening
where the side and bottom contours meet may
require minor adjustments for a final fit. Hold the
Universal Deck Adapter in place on your Mower
Deck and note any problem areas. Using the
marker, draw Reference Lines at the front and back
for revision. Remove the unwanted material using
the Saw or a File. It is best to cut in small amounts
and repeat to achieve the fit.
Figure 29
Cut Shape removed from Adapter
Figure 30
5. Modify the Hinge Plate.
Because of the variations in Mower Decks designs, modifications may be required to the hinge installation to
achieve proper alignment between the Universal Deck Adapter hardware and your Mower Deck hardware.
Note the two (2) examples shown in (
Figure 31
).
Large Distance
Small Distance
Front
CALL
TOLL
FREE
1-800-DR-OWNER
16
Figure 31
Содержание DR LEAF LAWN
Страница 23: ...Schematic Diagram Hand Vacuum Hose Assembly CALL TOLL FREE 1 800 DR OWNER 20...
Страница 27: ...Schematic Diagram Universal Lawn Deck Adapter CALL TOLL FREE 1 800 DR OWNER 24...
Страница 28: ...NOTES 25 DR LEAF and LAWN VACUUM Optional Accessories...
Страница 29: ...NOTES CALL TOLL FREE 1 800 DR OWNER 26 CALL TOLL FREE 1 800 DR OWNER 26...
