DR CE75021XEN, Руководство по безопасности и эксплуатации

Страница: 16 / 24

16
DR ®
PRO-21 Battery Lawn Mower
Chapter 4: Maintaining the DR PRO-21 Battery Lawn Mower
Regular maintenance is the way to ensure the best performance and long life of your machine. Please refer to this manual for
maintenance procedures.
Regular Maintenance Checklist
P
ROCEDURE
B
EFORE
E
ACH
U
SE
Check Battery Power*

Check General Equipment Condition 
Check Blade for Sharpness

Remove grass clippings and dirt from
under the housing

Replacing the Blade
Tools and Supplies Needed:
•
27mm Wrench
•
Block of Wood
•
Gloves
1. Remove the Battery and tip the Mower onto its side to access the Blade
under the Deck.
2. Use a block of wood to hold the blade steady ( Figure 19 ).
3. Remove the Blade Bolt using a 27mm Wrench.
Note: The Blade will only go onto the location Pins one way. Make sure that the
Blade is full onto the Pins before tightening the Blade Bolt.
4. Position the new Blade with its holes aligned with the pins and secure with
the Blade Bolt using a 27mm Wrench.
Before performing any maintenance procedure or inspection on the Mower, release the Blade Engage Wire Trigger and then
remove the Safety Key.
The blade is sharp; contacting the blade can result in serious personal injury. Wear gloves when servicing the blade.
Blade
Figure 19
Blade Bolt
Wood Block
Loosen
Tighten