DR 10.5HP PRO-26, Руководство по безопасности и эксплуатации

Страница: 10 / 36

10
DR
®
FIELD and BRUSH MOWER
4. Insert the belt over the Tensioner Spring and through the inside of the Deck
Pivot Bracket (
Figure 5 ).
5. Wrap the Belt around the Clutch Pulley under the Power Unit ( Figure 6 ).
6. Start the Belt into the groove of the Deck Pulley and turn the Pulley as you
guide the Belt around and into the Pulley groove (
Figure 7 ).
7. Install the Belt Guard that was shipped with the machine and secure with the
Knob from the product package (
Figure 8 ).
Removing the Brush Deck
It is recommended that the deck only be removed when installing other
attachments or performing maintenance.
Tools and Supplies Needed:

Gloves

Flat Head Screwdriver
1. Unscrew the Knob that secures the Belt Guard to the Deck and remove the
Guard
(Figure 8 ).
2. Place a screw driver between Blade Pulley and Belt.
3. While rotating the Blade Pulley, roll the belt off of the Blade pulley.
4. Push the belt in toward the Power Unit and the belt will fall off the Clutch
Pulley
(Figure 6 ).
5. Pull the belt toward the deck to remove the Belt entirely.
6. Remove the Collar and Detent pin (Figure 4 ).
7. Shift the Wheel Speed Lever into Neutral.
8. Pull the Power unit back to release the Power Unit Pin out of the Deck Pivot
Bracket.
Belt
Figure 5
Deck Pivot
Bracket
Tensioner
Spring
Your hands could get pinched when installing the Belt onto the Deck Pulley.
Wear Gloves to prevent injury.
Clutch
Pulley
Figure 6
Belt
The Power Unit should always have an Attachment installed for stability.
Blade
Pulley
Figure 7
Idler
Pulley
Belt Guard
Figure 8
Knob