Copyright © 2001~2018, Dr Robot Inc. All Rights Reserved.
www.DrRobot.com
V.28.08.18.Q
- 15 -
6) Press
button for few seconds, the charge station will check the battery and display what the reading is. It
should be same as your settings above.
7) If everything is right, you can press
button again to start charging.
8) Press
to switch the display to show the battery status. The display
should show each battery reading as below image.
*
Note
: If any battery reading is missing, please turn off the charging station and turn the Power switch to “OFF”,
and check the 7-pin connector, make sure it is connect well.
9) Keep the charger away from children and pet at all time! Never leave the charger unsupervised when it is
connected to its power supply. For more detail about charger station operation, warning and error message,
maintenance and safety message, please refer to “Intelligent Digital Balance Charger Operating Manual”.
