background image

10

 

        

DR

® 

PTO POST HOLE DIGGER

 

Call 811 before you begin any digging project. A new, federally-mandated national "Call Before You Dig" number, 811 was created 
to help protect you from unintentionally hitting underground utilities while working on digging projects. Every digging job requires 
a call. If you hit an underground utility line while digging, you can harm yourself or those around you, disrupt service and 
potentially be responsible for fines and repair costs. 

 

There may be buried power, gas, and/or telephone lines in the work area. Electric shock, death, or explosion may occur. 

 

Have the property or work area marked for buried lines and do not dig in marked areas. 

Chapter 3: Operating The DR PTO Post Hole Digger 

Operation Notes 

 

See the 

Owner’s

 Manual that came with your Tractor for all safety warnings and detailed information for operating your Tractor 

properly. 

 

Always operate the Tractor PTO at 540 RPM when Digging. 

 

Always disengage the PTO, lock the Parking Brake and shut off the Tractor when leaving the Tractor Seat. 

 

Never transport the Post Hole Digger while the PTO is turning. 

 

Never operate the Post Hole Digger when the auger point is more than 6 in. above ground level. Operating the digger in 
elevated positions may cause the 

PTO driveline “U” joints to bind resulting in equipment damage and operator injury.

 

 

Remove any debris buildup from the Auger before every use of the Post Hole Digger. 

Operation Steps 

1.

 

Lower the Auger Point slowly to the ground at the desired digging angle. 

2.

 

With the tractor throttle set to a slow speed, engage the PTO to begin turning the auger.  

3.

 

Slowly increase the throttle speed and lower the lift arms as the Auger begins to dig. 

4.

 

When the Auger has reached the desired depth, reduce the throttle speed and raise the lift arms. 

5.

 

Disengage the Tractor PTO before transporting to the next digging location. 

 

 

This machine is designed to operate at 540 rpm PTO Shaft speed only!  Never operate at a faster speed; doing so can cause 
serious injury to the operator or bystanders and could cause damage to the machine that is not covered under warranty. 

 

Read and understand 

your Tractor user’s manual and all 

Tractor safety Warnings for operating your Tractor safely before 

operating this DR PTO Post Hole Digger. 

 

 

This machine is designed to operate at 540 rpm PTO Shaft speed only!  Never operate at a faster speed; doing so can cause 
serious injury to the operator or bystanders and could cause damage to the machine that is not covered under warranty. 

 

Read and understand 

your Tractor user’s manual and all 

Tractor safety Warnings for operating your Tractor safely before 

operating this DR PTO Post Hole Digger. 

Содержание PTO POST HOLE DIGGER

















Отзывы: