22
In order to exchange the lamp in the face tanner this must
be held on one of the flat lamp ends, pushed a little
lengthwise and removed from the mounting (figure 24). The
new lamp is inserted in the same way.
Please ensure that you do not touch the glass bulb. In the
event that marks are made then the lamp must be cleaned
with pure alcohol or spirit.
fig. 23
fig. 24
Maintenance of the face tanner (type 24/1)
The filter cassette must be removed by releasing the
marked screws before maintenance (figures 22 and 23).
fig. 22
R e l e a s e
screws
fig. 25
fig. 26
release screws
In order to clean the filter and/or the lower safety sheet
this can be removed from the cassette (figure 26) by
releasing both screws (figure 25).
When 're-inserting' the sheets please make absolutely sure
that the filter sheet (see printing) is always inserted facing
upwards, i.e. towards the face-tanning lamp.
