DR. BENDER BELUGA SXC, Руководство по эксплуатации

Страница: 14 / 23

14
7.2 Service after 120 operating hours
A service is due after 120 operating hours. The machine counts the operating hours itself and tells you
when 120 operating hours are reached by a blue LED on the handle. All worn parts are replaced during this
service. The next service is carried out at further intervals of 120 operating hours. The service interval may
be extended by max. 10 %, so you can complete your work with the machine at your own convenience.
If the maximun service interval of 120 + 12 operating hours is exceeded, the warranty becomes null and
void.
7.3 Quarterly
Have the cables, switches, plugs checked by a qualified specialist (provision pursuant to VBG4) and record
this. Replacing the gearbox oil significantly increases the service life of the gearbox.
8.0 Speed setting depending on cutting speed
The drive units of the Beluga series allow stepless speed adjustment. You can thus set the best cutting
speed for your drill bit. This also provides a perfect, quick cut and the service life of the tool is also
significantly extended.
9.0 Warranty
Pursuant to our Terms & Conditions of Sale, we offer a warranty of 12 months from the date of purchase.
This covers the free repair of material and production defects which are shown to have been caused prior
to sale.
An original sales receipt must always be produced when asserting a warranty claim. It must include the full
address of the dealer, purchase date, and type code of the product. The user manual for the relevant prod-
uct as well as the safety instructions must have been followed.
Damage caused by operating errors is not covered by the warranty.
The manufacturer’s products are developed and built for specific applications. If the product is used for
purposes other than the intended purpose based on the user manual, or in the event of misuse, or if unap-
proved accessories are used, the warranty shall become null and void.
The products must be regularly maintained and cleaned according to the instructions in the user manual.
The warranty shall become null and void in the event of an intervention by third parties (opening the ma-
chine).
The warranty does not cover maintenance and cleaning work.
You must ensure that only original spare parts and accessories are used. The products must be purchased
from an authorised dealer. If non-original parts are used, this may result in consequential damage and in-
creased risk of accidents. The manufacturer is not liable for such damage. Disassembled, partially disas-
sembled units, and units repaired with third party parts are not covered by the warranty.
Certain parts are subject to normal wear and tear depending on use. These parts include e.g. carbon
brushes, ball bearings, switches, mains cables, seals, etc. These consumable parts are not covered by the
warranty. Consumable parts are highlighted in the spare parts lists.
10.0 General Safety instructions
The general safety instructions can be found in the supplied safety instruction booklet.