DR. BENDER BELUGA SXC, Руководство по эксплуатации

Страница: 12 / 23

12
5.3 Bedienung
Beluga SXD / SXC
Beluga SXD / SXC Beluga SXD / SXC
Beluga SXD / SXC
If the Powerbox will be connected to the net, the green LED
flashes. This means that the power box is in standby mode.
When you turn on the green pushbutton, the power box is
switched on. The green LED changes from blinking to a
steady light. With the speed control the speed from 0 to 100%
can be selected. In the operation with the drilling motors, this
value should always be set to 100% to obtain the maximum
speed of the drill spindle.
The panel of
Beluga SXW / SXC
now showing
Speed 000 min
-1
and the green LED is flashing.
By pressing the Plus + or minus - button you can change the
speed from 0 rpm up to 850 rpm.
By pressing the On-Off switch of the drill motor Beluga SXD /
SXC will now be accelerated to the preset speed.
During the drilling operation can be adjusted at any time-the
rotational speed.
The power display is mirrored by the Powerbox on the control
panel. This is described in detail in the operating instructions
of the Powerbox.