DPS Telecom D-PK-C16V2, Руководство пользователя

Страница: 42 / 94

36
How to Send TRIP Notifications (Voice 16 G2 Only) 10.4
1. Click on the Notifications button in the Provisioning menu. You can setup as many as 8 different notifications.
Begin the setup "wizard" by clicking on Edit for a notification number. In this example, we'll setup Notification 8 to
send an voice alert.
2. At the Notification Setting screen, select the conditions you want to be notified of from the drop down: Notify
on both Alarms and Clears, Notify on Alarms only, Notify on Clears only. (Selecting Notification Disabled
means you will not receive any type of alerts.) Select Trip Dialup (T/Mon) and click Next.
3. At the next screen, you'll select the phone number the NetGuardian should call when this particular alarm is
triggered. Enter the T/Mon's phone number and chose if you want the NetGuardian to dial only if the DCP poller
inactive is selected. Then click
Save and Next .
5. At the Schedule screen, you'll select the exact days/times you want to receive notifications. You can set 2
schedules per notification. For example, you may want to send after hours or at certain times during the week, and
at different hours on the weekend. Use the check boxes to select the days of the week, and select the time from the
drop down menus. Click
Save and Finish. To try a test notification, click the Test button (See next step.)
6. Click Test to send a test voice notification. NOTE: This test only means that your notification settings are
correct, but you still need to assign the notification to an alarm point (See step 6 of the "How to Send Email
Notifications" section).