IMPORTANT
To exit at any moment from the programming mode and implement an alarm
reset, push this button.
When first switched on the panel will display the following:
PROGRAMMING
Exiting Menu
Enable First Menu
Push this button to enter into the program mode and the panel will indicate that you
wish to detach one series label at a time.
Push this button again if you don’t want to select the series type and set the detached
label length.
By successively pushing these buttons you can change the series from 1 to 3
labels. Even if they are of different sizes but are part of a single series the panel
will display it:
4
Содержание DN01
Страница 1: ...USER MANUAL Label dispenser this product is certified DN01 DN02 DP03 DP02 ...
Страница 2: ......
