Uniwersalny miernik cęgowy
10
AC/DC range
Resolution
Accuracy
Overload protection
AC 200 mV
0,1 mV
±(1,2% + 5
digits
)
600 V DC/AC rms
Input impedance: 10 M F
requency: 40-200 Hz
AC 2 V
1 mV
±(1,2% + 3
digits
)
AC 20 V
10 mV
±(1,2% + 8
digits
)
AC 200 V
100 mV
DC 200 mV
0,1 mV
±(0,8% + 5
digits
)
600 V DC/AC rms
DC 2 V
1 mV
±(0,5% + 2
digits
)
DC 20 V
10 mV
DC 200 V
100 mV
DC 600 V
1 V
±(1,0% + 5
digits
)
Never perform the measurement if open circuit voltage to earth exceeds DC 600 V.
Resistance measurement
1. Set range switch
O
to position .
2. Connect red testing cable to V
socket
R
, and the black testing cable to COM socket
N
.
3. Attach gauging cables to measured circuit.
4. Read resistance value from the display
M
.
Ω
range
Resolution
Accuracy
Overload protection
200
0,1
±(1,5% + 3 digits)
250 DC/AC rms
Maximal open circuit
voltage: 0,25 V
2 k
1
20 k
10
200 k
100
2 M
1 k
20 M
10 k
Prior to resistance measurement the circuit’s power supply must be switched off and
all capacitors discharged During measurements > 1 M the multimeter needs few
seconds to stabilize measurement In case of open circuit the display will show "OL".
Capacitance measurement
1. Set range switch
O
to position.
2. Connect red testing cable to V
socket
R
, and the black cable to COM socket
N
.
3. Attach gauging cables to capacitor paying attention to polarization.
4. Read capacity on display
M
.
