Doyon SM302SG, Руководство пользователя

Страница: 6 / 32

A-2
INSTALLATION AND MAINTENANCE
The manufacturer suggests to read this manual carefully.
The bread slicer is manufactured with first quality materials by experienced technicians. Normal use
and adequate maintenance will guarantee a reliable service for years to come.
The SM302 bread slicer is available in four different slice thickness (1/2, 5/8, 3/4 and 1 inch).
A nameplate fixed to the left side of the slicer specifies the serial number, model number, amperage,
voltage and frequency.
Drawings, electrical diagram and replacement part numbers are included in this manual.
ATTENTION
ÉQUIPMENT DOYON INC. is not responsible for damages to the property or
the equipment caused by non certified personnel. The customer is responsible
for finding a qualified electrician for the installation of the slicer.
IN GENERAL
The weight of the crate is approximately 200lb (91kg). Be sure to lift the machine with a lifting
device or to be at least two persons for manual handling. Open the crate and remove all materials
used for packing as well as the accessories. Put the slicer on a stable table or counter and make sure
the slicer is on level.
DISTANCE TO RESPECT FOR THE SECURITY CONTROL
If you put the slicer against the wall, be sure to leave at least 6 inches between the emergency push
button and the wall.
To the electrician
The electrical supply installation must be in accordance with the electrical rating on the nameplate.
VERY IMPORTANT
BEFORE MAINTENANCE OR CLEANING,
DISCONNECT THE SLICER
1
1
In Québec, employer has to make sure that an appropriate locking method is used
(see section 185 and 186 -
Règlement sur la santé et sécurité du travail www.publicationsduquebec.gouv.qc.ca )
IF THE SLICER IS NOT INSTALLED WITH ALL THE PROTECTING PANELS, THE
SLIDING PUSHER AND THE TWO-HAND CONTROL DEVICE:
DON'T USE THE SLICER