A-5
JA8X & JA8XR Operation & installation
Installation
IN GENERAL
Take off the packaging material with care. Take off all the material used for packing and accessories.
If the equipment is delivered with casters, always lock them after installation and use flexible
electrical cable wire and flexible water line hose. The appliance must secured to the building
structure with restraining device to guard against transmission of strain to the electrical cable,
water line and connectors.
1.
to the electrician
Electrical supply installation must be in accordance with the electrical rating on the nameplate.
WARNING
The electrician must make sure that the supply cable does not come in contact
with the oven top which becomes hot.
2.
to the plumber
This equipment is to be installed to comply with the applicable federal, state or local plumbing
codes.
Connect the steam system (1/4 NPT) to the cold water distribution network.
We highly recommend to use a water softener to eliminate minerals in the water.
We suggest you to use CUNO # CFS6135 (Doyon part number PLF240) or equivalent.
WARNING
Do not adjust the pressure regulator or needle valves; it has been set at the
factory.
