Doyon FC18, Руководство пользователя

Страница: 8 / 60

A-5
INSTALLATION WARNINGS
POWER FAILURE WARNING
WHEN YOU HAVE A POWER FAILURE, SHUT OFF THE OVEN POWER SWITCH TO
PROTECT THE ELECTRONIC COMPONENTS WHEN THE POWER COMES BACK.
FOR YOUR SAFETY
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS
AND LIQUIDS IN THE VICINITY OF THIS OR ANY APPLIANCE.
INSTALLATION AND SERVICE
WARNING
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR
MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH.
READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.
Installation and service must be done by specialised technicians. Contact a certified electrician and
plumber for set up.
The oven must be connected to the utility and electrically grounded in conformity to the effective
local regulations. If these are not established, the oven must be connected according to the Canadian
Electrical Code (CSA-C22.1-XX) or National Electrical Code (NFPA 70-XX). Refer to last edition
year for XX. Installation must also
allow proper access for service (24 inches each side and back).
Do not permit fans to blow directly at the oven and whenever possible, avoid open windows next to
oven sides or back and wall type fans which create air cross currents the room
.
A disconnect switch must be installed close to the ovens to cut off the electrical supply of the oven at
anytime for maintenance or service.
DISTANCES TO RESPECT
A) Back and sides of the oven: 4 inches.
B) Top of the oven: a clearance of 12 inches from above the top of the oven must exist to permit
adequate venting.
C) Floor: on it's legs 4 inches minimum.
D) Sides of the oven: No clearance required from the end of the conveyor. Do not install other than
easily removable equipment for service and maintenance.