Dowtel WS-2100, Руководство по эксплуатации, Страница: 8 / 47

WS-2100/4100 Operating Manual
8
1.3 Sound & Tone
1.3.1 Power-Up Sound
When the terminal’s power is turned on, a beep-sound is transmitted.
1.3.2 Dial Tone
Indicates that call service is available.
1.3.3 Warning Tone
The sound transmitted to the handset in the following cases.
- In case the call is not available due to broken air link.
- In case the dialing is delayed after the handset is picked up.
- In case the terminal is not in the correct working mode.
1.3.4 Howler Tone
In case the handset is not properly placed, loud alarm buzzer will sound for 30 seconds, after short
Warning Tone.
1.3.5 Keypad Tone
When the keypad is pressed, a tone will be transmitted through the handset.
1.3.6 Ring Sound
The sound transmitted to the buzzer indicating the receipt of a call while the handset is lifted
1.3.7 Low Battery Warning Tone
When the terminal operates with the built-in battery and the battery strength is weak, a Low Battery
Warning tome will be heard.
1.3.8 VMS Notification Tone
A VMS notification buzzer will sound when VMS Message has been received.
1.3.9 Error Tone
An Error Beep Tone will sound when the keypad is pressed incorrectly. In this case, the terminal
will ignore incorrect operation.