Dowtel WS-2100, Руководство по эксплуатации, Страница: 32 / 47

WS-2100/4100 Operating Manual
32
4.5.8 Auto Dial Send Time Control
Auto Dial Send is a function that makes a call to the dialed number after specified time lapses.
Terminal starts making a call, specified seconds after user finishes dialing the number.
Auto dial send time is adjustable from 4 seconds to 8 seconds and default setting is 6 sec.
2 setting methods are provided below.
◆
Auto Dial Send Time Setting
1) Using A Menu Code
①
Enter #0*100
à
8
à
Maintenance Code
à
8
②
Press any number among 4 , 5 , 6 , 7 , 8 on the key pad. For example, if you press <5> key, the
send waiting time becomes 5 sec onds.
③
Press <*> button in succession.
#0*100
à
8
à
Maintenance Code
à
8
à
4
～
8
à
*
4.5.9 PCO Frequency Setting
This terminal supports the Metering Pulse and the Polarity Reverse for the PCO Interface.
If the Metering Pulse is required for the PCO Interface, 2 kinds of frequencies can be
supported.
1) Setting Metering Pulse Frequency to 12KHz
#0*100
à
8
à
Maintenance Code
à
9
à
1
à
*
2) Setting Metering Pulse Frequency to 16KHz
#0*100 à 8 à Maintenance Code à 9 à 2 à *
4.5.10 PRL select (Only applicable to WS-2100)
This is a crucial function to decide the source of Channel information when the phone
searches for CDMA Cellular Channel.
Prefer Roaming List which is being used in CDMA PCS Channel Searching can be
partially used in Cellular Channel Searching too.
If “Enable ” is selected,
channel information necessary for Cellular Channel Searching
is brought from Prefer Roaming List.
If “Disable ” is selected, the original Channel Searching Method is proceeded. In other
words, it searches for CDMA Primary A/B, Secondary A/B channel.
[Note] This phone supports Prefer Roaming List stated in accordance with IS-683A.