11
Step 4.
Figure 4
Remove the discharge valve balls, seats and o-rings from
the discharge manifold and inspect for nicks, gouges,
chemical attack or abrasive wear. Replace worn parts
with genuine Wilden parts for reliable performance. PTFE
o-rings should be replaced when reassembled.
Step 5.
Figure 5
Remove and inspect the ball retainer, retainer o-ring, and
valve ball from the bottom of the liquid chamber. Check for
nicks, gouges, chemical attack or abrasive wear. Replace
worn parts with genuine Wilden parts for reliable perfor-
mance. PTFE o-rings should be replaced when reassem-
bled.
Step 6.
Figure 6
Normally the inlet and discharge mani-
fold should not be disassembled during
regular pump maintenance. Should this
be necessary completely remove and
disassemble manifold clamp bands.
Step 7.
Figure 7
Inspect o-rings for wear or damage
and replace if necessary. PTFE o-rings
should be replaced when reassembled.
Step 8.
Figure 8
Use a 11 mm (7/16") wrench to remove
one set of clamp bands that secure one
liquid chamber to the one-piece center
section.
WILDEN PUMP & ENGINEERING, LLC
WIL-10140-E-08
S e c t i o n 5
D I S A S S E M B L Y / R E A S S E M B L Y
Содержание Wilden Original P1
Страница 21: ...S e c t i o n 5 N O T E S ...